Installing Longer Wall Panels Vertically
Can you install our longer OSB Wall sheathing panels vertically? Well, of course you can and the Ol’ Sage lets you know why you should.
Builder Insights / Blog
Tag / Installation
Overdriven Fasteners and Shear Capacity
Overdriven fasteners can affect the shear capacity. Here are the important things to look for and if necessary corrective actions required as outlined by the APA.
Is installing Windstorm horizontally a good idea?
Thinking about installing your Windstorm panels horizontally? Is it even possible? You best check in with the Ol’ Sage Builder before starting that project, he’ll set you right!
The Ten most Important Fasteners for Installing Roof Sheathing
All fasteners are critical. The ten “most important” fasteners in a roof panel are the ones in each corner and the six in the intermediate panel edge connections. Fasten your seat belts!
No Wax on the surface of OSB
Curious to know if you should use the wax side or the other side of OSB? It’s a common question which the Ol’ Sage Builder as the answer too!
Always Read the Instructions
One of the ones we neglect most often is to follow the manufacturer’s Instructions, something the Ol’ Sage Builder recommends you do!
Install your House Wrap Correctly!
Housewrap is a great way to reduce air leakage and prevent water from entering the wall system, however care must be taken to ensure it gets installed correctly!
Installing shingles over your SolarBord
Get some new insight from the Ol’ Sage Builder on if you can apply fiberglass shingles to your SolarBord Sheathing!
Better Configurations for Drywall Corners
A traditional three-stud corner means you have to insert attachment screws at an angle which can rip the paper face and may leave a slight bump in the finish – why not learn a better way of doing it! Read on for a new method by the Ol’ Sage Builder.
Secrets to OSB Sheathing Success
OSB sheathing is a sustainable, durable, economical and practical choice for builders and framers. OSB sheathing success relies on proper installation and there are a number of strategies to follow to minimize call backs and to ensure that your build enjoys longevity and aesthetic appeal.