November 2, 2015
/ Posted in: Builders, DIY, Framers
In an increasingly competitive market, most contractors are working to the slimmest profit margins. One way to improve your profit margins is to reduce the cost of each build. When you run a tight ship, your processes are streamlined and you offer a better, faster service with an organized, experienced crew. Many of the costs associated with a build are beyond your control; materials, land and labor all come at a price which the market dictates so your focus should be on the direct construction costs.
Read The Full Post »
October 29, 2015
/ Posted in: Builders, Dealers, DIY, Framers
The winters can be hard on tools and if you are consistently working in below zero temperatures, there are some essential maintenance steps you must take in order to keep your compressors and pneumatic tools in good working order. If at all possible, avoid using pneumatic tools in sub-zero conditions. If you must work below zero, then ensure that your equipment is properly maintained.
Read The Full Post »
October 19, 2015
/ Posted in: Builders, Dealers, DIY, Framers
Mold is insidious and occurs where moisture collects in a home. Once you get mold in your home, it can cause cosmetic damage, stains to furniture and drywall and reduce the quality of indoor air. Worse still, it can cause rot in wood and this may compromise the structure of the home. As with all things, prevention is the best cure, so here are some ways to stop moisture from collecting in the first place.
Read The Full Post »
October 8, 2015
/ Posted in: Builders, DIY, Framers
The rising costs of gas and construction materials, as well as increased competition mean that small to medium construction companies have to work hard to keep costs to a minimum. One of the ways to do this is to conserve energy and water onsite. However, there are really great reasons why you should turn on the HVAC and leave it on for the duration of your build.
Read The Full Post »
October 5, 2015
/ Posted in: Builders, Dealers, DIY, Framers
Framing is the single biggest contributor to the construction budget, accounting for (on average) around 18%. With rising costs and labor shortages, framing is becoming increasingly expensive. It behooves the small to medium construction firm to find ways in which to make the framing as efficient and cost effective as possible. You can mitigate some of the framing costs with careful planning, an efficiently run jobsite and the right tools.
Read The Full Post »
October 1, 2015
/ Posted in: Builders, Dealers, DIY, Framers
Accidents on construction sites can jeopardize the safety of your team and the public while causing delays or financial loss. While most construction sites already require safety with the use of protective gear and adherence to safety standards; reminders are never a bad idea.
Read The Full Post »
August 31, 2015
/ Posted in: Builders, Dealers, DIY, Framers
If your residential build occurs in building science climate zones one, two or even three, you may want to reconsider placing the ductwork for your air conditioning units in the attic, even if the attic is ventilated. Studies show you could be adding 15% or more to your energy bill with poor ductwork placement.
Read The Full Post »
August 14, 2015
/ Posted in: Builders, Dealers, DIY
Painting problems can really ruin an otherwise perfect job and you get stuck with time-consuming call backs. While selecting the wrong paint for the job can cause issues, most call backs result from improper application. Whether you are spaying, rolling, brushing or using a combination of these methods, becoming adept in paint application not only saves you time and money, it also finishes your job so professionally that you will turn your customers into raving fans.
Read The Full Post »
August 11, 2015
/ Posted in: Builders, DIY, Framers
Intersecting walls pose an energy-efficiency conundrum. The usual way to address the situation is through ladder backing (as opposed to 3-stud wall bucks) and continuous sealant for the top and bottom places along the stud edges. But this incredibly clever solution is easier, and provides room for more robust insulation.
Read The Full Post »
